Category: High Performance Coating Systems

Different Types of Industrial Coating

Posted on by Steel Tech

Industrial coating is the main method of protecting metal surfaces. The coating you are looking for depends on the usage and chemical composition, along with various other factors. For example, a special coating may be applied to a piece of equipment if it is used in an environment where corrosion may occur. The coatings serve the purpose of protecting the equipment against corrosion. This blog will discuss four types of industrial coating used in industries and the benefits of using them.

 

Exterior Electrostatic Coating

Electrostatic painting is also known as electrostatic spray painting, electrostatic airless spraying, or EAS spraying. It is the most common industrial coating applied to various metals and other materials. Such coatings are used in multiple industries, including auto parts, aerospace, electronics, plastics, and rubber. Electrostatic paint is usually applied to surfaces that need protection from corrosion and oxidation. It significantly reduces wear on machined surfaces, plastics, and rubbers.

 

Restoration

Electrostatic coating is also used for restoration purposes. The electrostatic paint is applied to the deteriorated parts to revitalize them and restore them to their original condition. Restoration is a process that applies electrostatic paint over the material’s surface that has lost its luster, corrosion, or other defects. Under the proper conditions, restoration can be done in just a few minutes.

 

In restoration, metal surfaces can be restored to their original condition by removing rust and renewing the metal surface’s paint or layer. Restoring the surface will preserve the metal part for a longer time and improve its durability.

 

Polishing and Buffing

This high-performance coating can be used to polish metal surfaces and give them a smoother finish. The electrostatic process is employed by manufacturers of shoes, optical products, and commercial products to apply polymers to the surface for high luster and other appearances. Buffing is a form of polishing using paper rolls with abrasives embedded to remove scratches. Buffing is the most common way of polishing metal and plastic surfaces.

 

Surface Treatments

Exterior electrostatic coating is also used for surface treatments, which can coat and seal porous materials, including wood and paper products. The electrostatic process is applied to the porous surface of wood products, ceramic tiles, and other porous materials to protect from corrosion and erosion. It seals the porous surface to prevent moisture penetration, and non-woven materials get used as adhesive carriers.

 

Kynar

This high-performance coating is commonly used for exterior applications. The process can provide an excellent barrier against chemicals, ultraviolet radiation, and environmental contaminants. It prevents the buildup of acids, salts, and other minerals, as well as ozone attack, preventing the degradation of coated materials. Kynar coating has a good gloss, solvent resistance, and resistance to blends with other paints.

 

Contact the Experts

At Steeltech Electropainting, we have a variety of experts to handle exciting and challenging projects. These experts will handle the various technical aspects while our people are available to assist you with all your needs. We take pride in our knowledge, experience, and teamwork, so please contact us with any of your coating needs.

What is a High Performance Exterior Coating?

Posted on by Steel Tech

If you’re looking for a way to improve the look and performance of your home’s exterior, a high-performance exterior coating may be the answer. These coatings can protect you from the elements while making your home look great.

 

1. What Is a High-Performance Exterior Coating?

It is a type of paint or other finish designed to resist weathering, fading, and other damage from the elements, including things like sunlight, wind, rain, and snow. Many home and business owners choose high-performance coatings for their buildings to protect their investment and maintain an attractive appearance. There are a wide variety of high-performance exterior coatings available on the market. The best choice for a particular building will depend on the structure’s specific needs.

 

A professional contractor or the homeowner can apply high-performance exterior coatings. However, it’s important to note that these coatings typically require special equipment and training to be applied correctly. As a result, it’s generally best to leave the job to a professional. Steeltech Electropainting, Inc in Hialeah Fl, offers a wide range of high-performance exterior coatings. We have offices in Dade and Broward FL. Our team has the experience and expertise to help you choose the perfect coating for your home or business. For residents of Dade and Broward FL, be sure to contact us today to learn more about our services.

 

2. Common Features of High-Performance Exterior Coatings

Superior Durability and Resistance to Chipping, Peeling and Flaking

Chipping, peeling, and flaking are common problems with traditional paints and coatings. But high, performance exterior coatings are designed to resist these issues. They are made from a high-quality resin that helps to create a strong barrier against the sun, wind, and rain. They provide a long-lasting finish that will look great for years to come. They are designed to last for many years, providing a durable finish that will protect your home or business from the elements.

 

Resistance to Stains and UV Damage

Stains and UV damage can ruin the look of a building in just a few short years. The exterior high-performance coating system is a specialized type of paint applied to the exterior of a building to protect it from the elements. The high-performance exterior coatings are designed to resist these problems, helping to keep your home or business looking new. They are often infused with UV inhibitors that help to prevent fading and discoloration. The exterior high-performance coating system can provide years of protection for your home or business when applied properly.

 

Curb Appeal of Your Home

Curb appeal is important for any home, but it can be especially important if you’re trying to sell your house. First impressions are key, and if potential buyers see an unkempt or unappealing exterior, they may not even want to walk through the front door. High-performance exterior coatings can improve the curb appeal of your home. They are available in a wide variety of colors and styles, so you can choose an option to complement your home’s existing look. They can also help hide imperfections and blemishes on your home’s exterior, giving it a fresh, new look.

 

3. Choosing the Best Coating for Your Building

When choosing a coating for your building, it is important to consider the structure’s specific needs. For example, if you’re looking for a coating that will resist fading from UV exposure, you’ll want to choose a specifically designed product. Similarly, if you’re looking for a coating resistant to stains, you’ll want to choose a product specifically designed for this purpose. You’ll also want to choose a color that complements your home’s style. You’ll also want to make sure that the coating you choose is durable and easy to maintain. There are many high-performance exterior coatings available on the market, so it’s important to research to find the best option for your building.

 

Conclusion

High-performance exterior coatings offer several benefits for homeowners and businesses. They are durable, easy to maintain, and resist fading, chipping, peeling, and flaking. They can also improve the curb appeal of your home. At Steeltech Electropainting, Inc, we specialize in electrostatic painting, polishing, and coatings. Contact us today to learn more about our services.

What Are the Benefits of Kynar?

Posted on by Steel Tech

Kynar is a polyvinylidene fluoride and has become very popular over the last decade as an alternative in exterior high-performance coating systems. It is typically applied by dipping or spraying techniques.

This article aims to help you understand what exactly Kynar is and the benefits of using it so that you can decide whether it suits your electrostatic painting needs. Continue reading “What Are the Benefits of Kynar?”

The Differences Between Electrostatic Painting and Powder Coating

Posted on by Steel Tech

Many people think that they can use Electrostatic Painting and Powder Coating interchangeably. This is not the case. Although the two processes are very similar and use electrical charges to paint metal surfaces, they are not the same. In fact, electrostatic painting can offer you a few advantages compared to powder coating.

If you are unsure which option to go for, read ahead and see the differences between electrostatic painting and powder coating.

Ready to Go Paint Vs. Paint that Needs to Be Cured

The main difference between electrostatic painting and a powder coating is that electrostatic paint is ready to go and dries quickly on the surface of the painted object. In contrast, powder coating needs to be cured in an oven at high temperatures.

All Metals Can Be Painted Vs. Only Certain Metals Can Be Painted

Electrostatic paint is suitable for all metals and can be used on large surfaces and surfaces with difficult-to-reach nooks and crannies. The same is not the case for Powder Coating. This is because of two reasons. Firstly, the object that is being painted has to be the right size to fit into an oven so that the paint can be cured. Next, it has to be a material that can withstand temperatures up to 385 degrees Fahrenheit. Powder coating would not suit a wall-like metal surface that cannot be moved or a weaker metal object that can get warped or meltdown in the oven.

On-site Painting Vs. at The Shop Painting

Because of the curing process that powder coating requires, powder coating cannot be done on-site. All objects that need to be painted have to be transported to the shop. This can cause delays and extra time and money needed for transport. Electrostatic painting, on the other hand, can be done entirely on-site. It can also be done at the shop if it is more convenient for the clients, meaning more options.

No Downtime Vs. Disruptions to Regular Business

For electrostatic painting, nothing has to be moved out of its place or taken to a second location to be painted, which means there is little to no downtime. The clients can go about their day while the painters work and when the objects are drying. As for powder coating, any object that needs to be painted will have to be at the shop for at least 24 hours, considering curing time and transport time. If any of these objects are essential for everyday business, there can be delays and disruptions.

A Thin Even Finish Vs. a Thicker Finish

A powder coating can give you a durable and even finishing of paint, but the coating is quite thick and can be susceptible to cracks and chips. If you were hoping for a thinner coat of paint, then powder coating is not the right option for you because attempting to thin a powder coat can lead to patchiness and an uneven finish. On the other hand, electrostatic painting gives you a thin and even coating along all the object surfaces that lasts long and is durable.

A Pristine Finish Vs. Chances of Damage During Transport

Electrostatic paint is sprayed onto an object, and then the object is left in its place to dry without being handled or moved around. As for powder spray, the object has to be transported first to the shop, then the oven once it has been painted, and then back to its location. During all of this transport, there is a chance that your objects might be at risk of damage.

Keeping in mind all of the differences that we have stated between electrostatic painting and powder coating, we suggest you go for electrostatic painting.

Steeltech Electropainting, Inc. – Metal Painting Company

Steeltech Electropainting, Inc. is a family-owned and operated business specializing in on-location Electrostatic Painting, Restoration and Refinishing services, and Polishing and Buffing. Our expertly trained and skilled team always does a good job and completely satisfies our customers.

For more information on our services and the different industries we work in, visit our website. You can also fill out a contact form with any questions or concerns you may have or call us at 800-638-4413.

Benefits of Using High-Performance Coating Systems On Metal Surfaces

Posted on by Steel Tech

When you need a more durable, higher quality paint, consider an upgrade to high-performance coating systems. High-performance paint is better at standing up to wear and tear than conventional coating. 

Aside from the ability to withstand harsher conditions, it can also be applied to tough materials, such as aluminum and steel, and can be applied to surfaces like copper and brass. 

At Steeltech Electropainting, we can say from experience that electrostatic spray painting is the preferred option. Few people know what it does or how to operate it, which is why you should leave paint jobs to the professionals. 

Whether you do the job on your own or have it professionally done, the result is earth-shattering.

Its efficacy is driven by the science of opposites attracting one another, the paint is negatively charged, while the metal surface is positive. This creates a resilient bond for a long-lasting finish. 

You may be tempted to try it with other materials, but it won’t work as well. 

For example, electrostatic paint doesn’t work on wood. It’s ideal for painting automobiles and all metal objects. Without further ado, let’s check out its many advantages.

Dries Quickly

When you want the job done quickly, this is one of the fastest high-performance coating systems. After completing your paint job, it dries in as fast as two hours. 

Think about the convenience of taking your car in for a paint job with a two-hour turnaround. Or if you’re in a business environment, and you need to quickly polish the elevator doors, staircase, or restroom partitions, just contact Steeltech Electropainting and we’ll be in and out before you know it.  

High-Quality Results

There is truly no other option for painting metal. 

The magnetic bond between the positive and negative particles creates a smooth finish you can’t find with other coatings. It creates a nonporous finish, making all surfaces immune to bacteria and mold, even in harsh conditions. 

This is an important feature for everyone, especially business owners who rely on hygienic applications to ensure the safety and wellbeing of their customers.  

Cost-Efficient

You may think high-performance coating systems are expensive when compared to standard paints. But not only does it get the job done, but it will also reduce the necessary maintenance by seeping deeper into the surface’s molecules. 

There is little maintenance involved when using electrostatic paint, and no need for a primer before the first coat, yet it can last up to ten years. This is largely because it prevents corrosion and other common damages. 

That means it can also save you a bundle on repairs.

Less Overspray

When hiring a professional to complete a job with exterior high-performance coating systems, or whether you do it yourself, overspray is always an obstacle. 

If the spray gets on nearby buildings and cars, you end up paying for the damages. Even with insurance, the deductible can be hundreds of dollars. 

Fortunately, electrostatic systems can transfer 98 percent of the paint to the object being painted, significantly reducing overspray.

Hire a Professional for Increased Longevity

Again, few people have ever heard of electrostatic painting and even fewer know how to effectively operate it. To ensure the longevity of your metal surfaces, it’s strongly advised that you have them treated by a professional. 

The quality of the paint will strengthen the object, no matter what, but when applied with an expert hand, it has a better chance of withstanding high customer traffic, the elements, and other harsh conditions (i.e., moist, humid locker rooms).

When you want the absolute best, not only should you use the best product, but it should be operated by the best professionals. We have been in operation for over ten years, and in that time we’ve garnered the trust of thousands of Florida’s most successful architects, facility managers, CEOs, office managers, building supervisors, and designers. 

They all rely on the quality and performance of the Steeltech Electropainting crew.

Contact Us

You know the advantages of using Electrostatic, one of the best high-performance coating systems to use. When you need a skilled refinisher to complete any job, contact our team. 

We are a licensed and insured family-owned and operated business that does painting, polishing, buffing, and refinishing at competitive prices. 

You can visit our facility or we can come to your site. Call 800-638-4413 to learn more about our services.

Contact Us Today!